Label Rewinders with Vesratile Control Input and optional Start Delay
|Click on a photo for an enlarged version.|
|The new CAT-4 Heavy-Duty Label Rewinders
Created to extend the capabilities of our heavy-duty rewinder range, the CAT-4 is now our most performant revinwder.
Unlike the CAT-3, the CAT-4 offers 4 inputs signals (where the CAT-3 only offers one) allowing the rewinder to be controlled by the printer through the external control input. This versatile control input will accept open collector or voltage 4 to 10V max., high or low active, jumper selected on main board. The connection is made using a 3.5mm mono jack.
An optional Adjustable Start Delay allows the printer to execute back-feed without resistance from the rewinder.
The CAT-4 has a 3-position torque switch (compared to 2 on the CAT-3). Together with the speed adjustment, it allows the user to control the tightness of the rewound rolls. The absence of a tension arm allows better rewound rolls and increases the overall reliability of the rewinder.
For applications where the tension arm is required, the CAT-3-TA will be recommended.
The CAT-4-STANDARD handles labels up to 155 mm wide and will wind a roll of labels up to a 300 mm diameter. Torque and Direction are fully controllable from the Control Panel. Triple torque ranges provide plenty of power for use with a LABELMATE Slitter, too.
For wider labels up to 255 mm (10”), choose the CAT-4-10-INCHES.
Model CAT-4-ACH includes an Adjustable Core Holder that accepts any core size from 25 mm to 101 mm in diameter and up to 155 mm in width
The optional Adjustable Paper Guide APG-CAT with movable arm can be installed in minutes on the base of the CAT-4-ACH or CHUCK.
The CAT-4-CHUCK includes LABELMATE’s durable “Quick-Chuck”tm quick-locking Core Chuck, permitting the fastest loading and unloading of cores and label rolls. The CAT-4-CHUCK is ideal for label slitting applications, high-volume production environments, or anywhere the ultimate convenience in Rewinders is desired. The CAT-4-CHUCK is available for 38-, 40-, 44-, 70, 76- and 100 mm cores.
* The CAT-4-CHUCK, Standard and 10-Inches are available for 38-, 40-, 44-, 70-, 76- and 100 mm diameter cores.
* SPEED: The indicated speeds are the maximum speeds at beginning of a 76mm core roll.
MAXIMUM LABEL ROLL WEIGHT:
LABEL REWINDERS OPTIONS
Specifications are subject to change without notice.