Reel-to-Reel Counting Systems & Label Counters
|Click on a photo for an enlarged version.|
RRC-330 Reel-to-Reel Counting Systems – For regular labels
The RRC-330 Reel-to-Reel Counting System brings you new convenience in a self-contained table-top Label Counting System using a pre-set counter. The RRC-330 accepts rolls with a maximum size of 330mm. The optional built-in encoder allows length measurement and offers direct read-out in Metric or British & American Units.
RRC-330-U Universal Reel-to-Reel Counting Systems – For all type of labels
The RRC-330-U Universal Reel-to-Reel Counting System uses a state of the art ultrasonic fork detector that allows the RRC-330-U to count almost any type of labels, including transparent or dark labels. The ultrasonic detector detects the labels by sensing the difference in thickness between the backing paper and the backing paper plus label.
All RRC-330accepts roll with a maximum outer diameter of 330mm. Take-up shaft is available both in Standard and Adjustable Core Holder.
The Standard take-up shaft is fitted with a “Quick-Change” shaft that allows to quickly change the core holder diameter (38, 40, 44, 50, 70, 76 and 100mm available).
The ACH (Adjustable Core Holder) accepts cores from 25 to 101mm. The unwind shaft is equipped with the new Adjustable Wearless Brake system to adjust the web tension for tighter rewound rolls. Both shafts are supplied in 40mm and 76mm (other core diameters available on-demand).
The RRC-330-U and RRC-330 Reel-to-Reel Counting Systems are backed by LABELMATE’s famous 3-Year Parts and Labor Limited Warranty, assuring you trouble-free performance. (The Warranty Period for included Power Supplies is 1-Year).
COUNT-100 and COUNT-200 Counters
The PC-1 Label Counter is a popular option on our S-100 and S-200 Label Slitters. Many times, however, users don’t need to slit labels, just count them. To save users money, LABELMATE has introduced two Label Counters and Counting Stations based on the S-100 and S-200 Slitter chassis but without the Slitter function. The COUNT-100 and COUNT-200 will handle label webs up to 170 mm and 255 mm (6.5- and 10-inches) wide respectively. A CAT-3 Rewinder pulls the labels through the counter. The versatile Counters can be used at the output of a printer, or can be used with an Unwinder and a CAT-3 Rewinder to form a stand-alone off-line label inspection / counting station.
If desired, when the pre-set count is reached, the COUNT-100 and COUNT-200 can send a “HALT” signal to the CAT-3 Rewinder, causing it to stop.
The counter sensor itself is a state-of-the-art infra-red transmitting device that shines through the label web and detects the gap between successive labels. There is a sensitivity control to adjust for different kinds of label webs.
COUNT-100-U Universal Counter
The new COUNT-100-U Universal Counter uses a state of the art ultrasonic fork detector that allows the COUNT-100-U to count almost any type of labels, including transparent or dark labels. The ultrasonic detector detects the labels by sensing the difference in thickness between the backing paper and the backing paper plus label.
The COUNT-100, COUNT-200 and COUNT-100-U are backed by LABELMATE’s famous 3-Year Parts and Labor Limited Warranty, assuring you trouble-free performance. (The Warranty Period for included Power Supplies is 1-Year).
RRC-330 REEL-TO-REEL COUNTING SYSTEM
1 Maximum speed with a 76mm take-up roll diameter, at the beginning of the roll.
2 Maximum speed at end of 330mm roll.
MAXIMUM LABEL ROLL WEIGHT: 7Kg.
HEAVY-DUTY LABEL COUNTERS
Specifications are subject to change without notice.