Heavy-Duty Label Slitters & Slitting Packages
S-100, S-200, SLIT-100, SLIT-200, TWIN-SLIT-100
Click on a photo for an enlarged version.


S-100 with PC-1


SLIT-100


S-100-SP


TWIN-SLIT-100 Package


Here’s the most convenient solution for slitting and rewinding narrow labels. LABELMATE Label Slitters allow you to print small labels several across (“up”) and then slit them to the desired width. This multiplies your print efficiency by a factor equal to the number of labels across, and dramatically increases your print head life and ribbon usage efficiency. The rugged LABELMATE S-100 and S-200 are High-Speed, Heavy-Duty Label Slitters identical in construction except for size.

The Slitters can be used either “in-line” or “off-line”.  In “in-line” use, the Slitter is placed between the printer output and the Label Rewinder. The slitting speed is determined by the printer output speed. In “off-line” use, the Slitter is placed between a UCAT Unwinder and a CAT-2 Rewinder or TWIN-CAT-2 Dual Spindle Rewinder / Unwinder. Off-line slitting is recommended for production work or for use with three or more blades. With slitting speeds up to 76cm/sec (30-ips) in “off-line” mode, you’ll make fast work of your slitting jobs.

Now also available is the S-100-SP Self-Powered Slitter ideal for off-line slitting solutions. The S-100-SP has powered rollers that pull the labels through the cutting blades, rather than relying on the Label Rewinder to provide the motive force. You can use any LABELMATE Chuck Model Rewinder with the S-100-SP.

An optional six- (6) digit PC-1 Pre-set Counter allows you to pre-set the number of labels to be slit. When the counter reaches the preset number, it sends a “HALT” signal to the Rewinder. Power to the Rewinder motor is then shut off and braking is applied. You’ll have no annoying label spills to contend with.

The easily replaced slitting blades are click-adjustable, maximizing their useful life. Special, very sharp, ground steel blades are supplied with the S-100 and S-200 and are recommended for replacement. No tools are required for blade adjustment or replacement. During slitting, the blades are stabilized with LABELMATE’s proprietary system, giving a clean cut at all speeds. Rugged, heavy-gauge welded steel construction and precision parts yield a product of the highest quality.

 

MODEL
TWIN-SLIT-2 SLITTING PACKAGE DESCRIPTION
Package includes all the items listed.
WEB WIDTH
SPEED
TWIN-SLIT-100- DELUXE
  • S-100 Heavy-Duty Label Slitter with 2 Blade Holders & Blades;

  • TWIN-CAT-2-CHUCK Dual Spindle Heavy-Duty Rewinder; two 3” dia. “Quick-Chuck”™ quick-locking Core Chucks are Standard; specify if 1.5”, 40mm, 70mm or 4” diameters are desired instead. Heavy-duty power supply included.

  • CAT-2-Standard Rewinder with 3" Fin Style Core Holder used as a variable tension-control Unwinder to provide the maximum control over rewind tension.

  • Adjustable Locking Bar to lock units together in position;

  • HSB-10 High Speed Replacement Blades (10 Blades).
Up to 6”
Up to 30 ips (inches per second
TWIN-SLIT-100
Economy
Package uses a UCAT-1 Heavy-Duty Label Unwinder with Adjustable Braking to provide limited control of rewind tension.
PC-1 /
PC-3
Optional digital Preset Counter for opaque labels. Labels must have a gap between each label. Can preset batch size to automatically stop your TWIN-CAT-2 Rewinder when your job is finished. Can be ordered with any SLIT Package. Factory installed only.
Any
Any


MODEL

Complete Money-Saving “Off-Line” Label Slitting Packages

Package includes all the items listed.
WEB WIDTH
SPEED
SLIT-100-DELUXE
  • S-100 Heavy-Duty Label Slitter with 2 Blade Holders & Blades;

  • CAT-2-CHUCK Heavy-Duty Rewinder; 3” dia. “Quick-Chuck” quick-locking Core Chuck is Standard; specify if 1.5”, 40mm, 70mm or 4” diameter is desired instead. Heavy-duty power supply is included.

  • CAT-2-Standard Rewinder with 3" Fin Style Core Holder used as a variable tension-control Unwinder. Provides the maximum control over rewind tension.

  • 2 Aluminum and 2 Thin Plastic Separator Plates*;

  • Adjustable Locking Bar to lock units together in position;

  • HSB-10 High Speed Replacement Blades (10 Blades).

Up to 6”

Up to 30 ips (inches per second)
SLIT-100-PACKAGE
ECONOMY
Package uses a UCAT-S Economy Label Unwinder with fixed brake in place of the CAT-2 Rewinder / Unwinder. The UCAT-S does not provide control over the rewind roll tension
SLIT-200-DELUXE

S-200 Heavy-Duty Label Slitter with 3 Blade Holders & Blades;

· CAT-2-CHUCK-10 Heavy-Duty Rewinder with 10” wide “Quick-Chuck”™, quick-locking Core Chuck for 3” cores;

· CAT-2-W10 Heavy-Duty Rewinder used as a variable tension-control Unwinder to provide the maximum control over rewind tension.

· 2 Aluminum and 3 Thin Plastic Separator Plates*;

· Adjustable Locking Bar to lock units together in position;

· HSB-10 High Speed Replacement Blades (10 Blades).

Up to 10”

Up to 30 ips
SLIT-200-PACKAGE
Economy package uses a UCAT-1-W10 Label Unwinder with adjustable braking in place of the CAT-2-W10 Rewinder / Unwinder. The UCAT-1-W10 provides limited control over the rewind roll tension.


INDIVIDUAL SLITTER SPECIFICATIONS
S-100 Label Slitter
S-200 Label Slitter
Size: HxWxD
12x12x12-inches. (305x305x305mm)
15x15x15-inches. (381x381x381mm).
Label Width:
 Up to 6.5-inches (170mm). Up to 10-inches (255 mm ).
Number of blades
 2 included.
Recommended max. 4		 3 included.
Recommended max. 5
Speed:
Same as printer speed for in-line use. Up to 76cm/sec (30-ips) in off-line use
Blade Holders
 Additional Blade Holders Model BH-1 are field installable. Includes blade
Power:

No power is required for the Slitter itself.
Replacement Blades

Special Precision High Speed Cutter Replacement Blades for longest life and best performance. 10 blades are supplied in a convenient dispenser.
Optional

Model PC-1 six- (6) digit Pre-set Counter to set batch size. PC-3.
Warranty:

3-year Parts and Labor Limited Warranty. One-year Warranty on Pre-Set Counter & power supply.

Specifications are subject to change without notice.                         









 


 
Questions, comments, problems, or suggestions about this web site?
Please send e-mail to webmaster@labelmate.com.
Copyright © 1999 - 2008 LABELMATE, LLC. All rights reserved worldwide.
Permission is granted to use images and content solely for purposes of promoting LABELMATE products. Any other use is not authorized unless agreed to in writing by LABELMATE.
Product specifications and prices are subject to change without notice.