|
|
 |
|
|
Accessories for LABELMATE PRODUCTS
Click on any accessory name to see the picture.
|
Accessories for CAT and UCAT
|
| APG-CAT: Optional Adjustable Paper Guide for CAT-2-ACH or CAT-2-CHUCK. Guides the outer edge of the label web to ensure an even roll edge. |
|
ADAPT-326: Pair of adapters for use on any 76mm diameter CAT-2-CHUCK. Allows use of 152mm (6") diameter cores.
|
| BURST-180: Burster Bar attached to the CAT-2-CHUCK Rewinder to conveniently burst perforated tags or labels. Use "in-line" with your printer, or "off-line" with your Unwinder and your Rewinder. |
|
Accessories for MINI-CAT
|
|
Outer Flange MC-10: Optional Outer Flange for MC-10 only.
|
|
APG-MC: Optional Adjustable Paper Guide for the MC-10 or MC-11 Rewinder. Guides the outer edge of the label web to ensure an even roll edge.
|
|
Accessories for TWIN-CAT
|
|
INSP: Inspection Fixture mounts in minutes on the side of your TWIN-CAT-2. Includes two rollers that your labels glide over as they are presented for inspection. Bi-directional, variable speed operation allows control over winding tightness as well. Can be started and stopped with the optional Foot Switch listed below. (No picture available see INSP + PC).
|
|
INSP + PC: Optional Preset Counter with adjustable counter sensitivity. Conveniently pre-mounted on the INSP Inspection Fixture ready to plug in and use.
|
|
Foot Switch: Foot Switch to start and stop the TWIN-CAT-2, CAT-2, or CAT-16 Rewinder.
|
|
Accessories for QUICK-CHUCKS
|
|
Flange Q7670: 13" diameter inner Flange for Quick-Chuck 70 or 76mm core diameter.
|
|
Flange Q3840: 13" diameter inner Flange and Hub for 38 or 40mm Quick-Chucks.
|
|
Flange QC: 13" diameter outer Flange for 3" diameter Quick-Chucks.
|
|
Accessories for Slitters
|
|
Label Separator: Label Separator Plates keep slit label rolls from interleaving or telescoping. Use Aluminium Separator Plates for the outer Plates and thin Plastic in-between slit rolls. Typical order: 1 Aluminium Separator Plate + Plastic Plates equal to the number of cutting blades.
|
|
HSB-10: 10 Precision High-Speed Blades for Slitters.
|
|
BH-1: Additional Blade Holder Assembly Includes Precision High-Speed Blade.
|
|
PC: Preset Counter with adjustable counter sensitivity. Counts single- or multi-accross label and can preset batch size. Includes a Halt Control Cable to optionnally stop your CAT-2 Rewinder automatically when your job is finished. Factory installed only.
|
|
Accessories for Label Dispensers
|
|
LD-Flanges: Optional inner and outer Flanges for label dispensers. Fits all models. Sold in sets of two flanges.
|
|
LDC-1: Optional counter. Available for LD-100 and LD-200 models. Factory installed. Not for stainless models.
|
|
|