Powered Label Dispensers
LD-100T, LD-200T & LD-100S Heavy-Duty Label Dispensers (...more)

Heavy-Duty Label Rewinders CAT-2
“CAT-2” Heavy-Duty Label Rewinders (...more)

Low-Cost Label Rewinders
MC-10A & MC-11 Popular & Economical “MINI-CAT” Label Rewinders (...more)

Dual Spindle Unwind / Rewind Stations
Versatile Stand-alone Unwind / Rewind Stations with Label Inspection and Counting Options! (...more)

Heavy-Duty Label Unwinders
“Ucat” Heavy-Duty Label Unwinders (...more)

Label Slitters & Slitting Stations
S-100, S-200, SLIT-100, SLIT-200, TWIN-SLIT-100 (...more)

Counters & Counting Stations
“C-100” & “C-200” (...more)

"QUICK-CHUCKS"TM Core Chucks
Quick-Loading Core Chucks for Volume Label Production (...more)

Accessories
Accessories for LABELMATE PRODUCTS (...more)





Click on the table title to go to the individual Product Page.


LABEL DISPENSERS

MODEL
DESCRIPTION
LABEL WIDTH
LABEL LENGTH
ROLL DIA.
LD-100-RS
Automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation! Not for transparent labels.
Up to 4.5"
0.24” to 5.9”

8,6"
LD-200-RS
Same features as LD-100-RS, but with wider label capacity.
Up to 6,5"
0.5” to 5.8"
8,6"
LD-FLANGES
Optional aluminum Flange Plates suggested for use with narrow labels that may have a tendency to telescope or fall off the core. Set of 2 Flanges for LD-100-RS or LD-200-RS.
N/A
N/A
N/A
LDC-1
Optional Label Counter for LD-100-RS & LD-200-RS. (Factory installed)
N/A
N/A
N/A
HS-PS
High-speed power supply to increase speed of the dispenser.
N/A
N/A
N/A

MODEL
DESCRIPTION
LABEL WIDTH
LABEL LENGTH
ROLL DIA.
LD-100T
Automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation! For transparent or opaque labels!
1” to 4.5” max.
0.5” to virtually unlimited length.
8.6” max.
Core I.D. 1.5” to 3”
LD-200T
Same features as LD-100T, but with wider label capacity.
1” to 6.5” max.
0.5” to virtually unlimited length.
8.6” max.
Core I.D. 1.5” to 3”
LD-100S
Label Dispenser with continuously variable speed control and foot switch. Ideal for production lines and very small or transparent labels.
4.5” max.
Not limited
8.6” max.
Core I.D. 1.5” to 3”
LD-FLANGES
Optional aluminum Flange Plates suggested for use with narrow labels that may have a tendency to telescope or fall off the core when placed on the Label Dispenser. Also useful if you want to use fan-folded rather than rolled labels. Set of 2 Flanges fits LD-100/T, LD-100S, or LD-200/T.
N/A
N/A
N/A
LDC-1
Optional Label Counter for LD-100T or LD-200T. (Factory installed only)
N/A
N/A
N/A
HS-PS
High-speed power supply to increase speed of the dispenser.
N/A
N/A
N/A



FULL SIZE "CAT" (Constant Adjustable Torque) HEAVY-DUTY LABEL REWINDERS

MODEL
ADD SUFFIX
DESCRIPTION AND FEATURES
WIDTH
 DIAMETER
SPEED
CAT-2
 CHUCK
CAT-2 with "Quick-Chuck" Quick-locking core chuck. 3" diameter standard. Many other core sizes are available.
Up to 6”
Up to 12”
Up to 30 ips, (inches per second)
(NONE)
The “Industry Standard” Heavy-duty Rewinder. For 3” cores. Powerful dual torque ranges. Bi-directional. Adjustable “TORQUE” Control. External “HALT” Control (use is optional).
Up to 6”
Up to 12”
1-INCH
CAT-2 for 1” diameter cores.
Up to 6”
Up to 8.6”
W10 CAT-2 for labels up to 10" wide. 3" standard core.
Up to 10”
Up to 12”
ACH
CAT-2 with an Adjustable Core Holder for any core size from 1” to 4” in diameter. Use APG-CAT if you wish to also guide the outer edge of the label.
Up to 6”
Up to 11”
R-16-CHUCK Tight rewind rolls up to 16" in diameter. 3" ‘Quick-Chuck’ standard*.
Up to 6”
Up to 16”
CAT-16
-
 Wide heavy-duty Rewinder / Unwinder for 3" cores up to 16" wide. Same features as CAT-2 Rewinder. Universal switching power supply for extra power.
Up to 16”
Up to 10”
ADAPT-326
-
 Adapter for 3" CAT-2-CHUCK allows use of 6" diameter cores.
-
-
-
APG-CAT
-
 Optional Adjustable Paper Guide For CAT-2-ACH or CAT-2-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.
-
-
Installs in minutes
HD-PS
-

120V – 60Hz DC Heavy-Duty Power Supply.
Output: 14V – 4.6A
Recommended when using a Slitter.
-
-
-
ACH-CAT
-
 Adjustable Core Holder for any core size from 1" to 4" in diameter. With inner flange.
Up to 6"
-
-

MODEL
ADD SUFFIX
DESCRIPTION AND FEATURES
WIDTH
 DIAMETER
SPEED
CAT-2-TA

CHUCK
The industry standard Heavy-duty Label Rewinder with an easy-loading ‘Quick-Chuck’. Ideal for production work. 3" standard*.
Up to 6,5"
Up to 12 "
30 ips, (inches per second)
STANDARD
The ‘Industry Standard’ Heavy-duty Label Rewinder. 3" standard*.
Up to 6"

1-INCH
CAT-2-TA for 1" diameter cores.
Up to 6"
10-INCHES
CAT-2-TA for labels up to 255 mm wide. 76 mm (3") standard*.
Up to 255 mm (10")

ACH
CAT-2-TA with an Adjustable Core Holder for any core size from 21" to 4" in diameter. With inner flange. Use APG-CAT if you wish to also guide the outer edge of your label.
Up to 6"
ADAPT-326
-
 Adapter for 76mm CAT-2-TA-CHUCK allows use of 152 mm diameter cores (6”).
-
-
-
APG-CAT
-
 Optional Adjustable Paper Guide For CAT-2-TA-ACH or CAT-2-TA-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.
-
-
Installs in minutes

* Standard, CHUCK and 10-Inches Models are also available with a 1.5", 40-mm, 70-mm and 4" diameter “Quick-Chuck”™ at the same price (except the 4"). Specify when ordering.


LOW-COST LABEL REWINDERS / UNWINDERS: "MINI-CAT"

MODEL
DESCRIPTION
LABEL WIDTH
ROLL DIAMETER
SPEED
MC-10A

Quality, low-cost Rewinder & Unwinder, coreless or 3" diameter core holder. Bi-directional with multiple rewind / unwind force settings.
5"
Up to 8.6"
Up to 10 ips, (inches per second)

2nd FLANGE MC-10A
Optional Outer Flange for MINI-CAT-10 only.
-
8.6"
-
APG-MC
Adjustable Paper Guide for MINI-CAT-10A or MC-11. Guides outer edge of label to ensure an even roll edge.
Same as Rewinder Model.
-
-
MC-11
Same as MINI-CAT-10 but with continuously Adjustable Core Holder for 1" to 4" diameter cores.
4.5"
Up to 8.6"
Up to 10 ips, (inches per second)



DUAL SPINDLE UNWIND / REWIND STATIONS: "TWIN-CAT-2"

TWIN-CAT-2

ADD TWO CORE HOLDERS
FROM LIST
(MIX OR MATCH)
CORE DIAMETER
WIDTH

NUMBER OF FLANGES
1-INCH
1"
6"
1
STANDARD
3"
6"
2
STANDARD 10-INCH
3"
10"
2
ACH-CAT (No Mix*)

1" to 4"

6"
1
CHUCK
1.5"
6.7"
1
40 mm (1.57")
6.7"
1
70 mm (2.76")
6.7"
1
3"
6.7" or 7.8" or 10.6"
1
4"
6.7" or 7.8" or 10.6"
1
* The ACH-CAT-S core holders can not be mixed with another type.

MODEL
DESCRIPTION
WIDTH
INSP-1
 Inspection Fixture mounts in minutes on the side of your TWIN-CAT-2. Includes two rollers that your labels glide over as they are presented for inspection. Bi-directional, variable speed operation allows control over winding tightness as well. Can be started and stopped with the optional Foot Switch listed below.
Up to 6"
INSP-1 + PC-1
 Optional Preset Counter conveniently pre-mounted on the INSP-1 Inspection Fixture ready to plug in and use. Adjustable counter sensitivity.
-
FOOT SWITCH
 Foot Switch to start and stop the TWIN-CAT-2, CAT-2, or CAT-16 Rewinder.
-


FULL SIZE HEAVY-DUTY LABEL UNWINDERS: "UCAT"

MODEL
ADD SUFFIX
DESCRIPTION
WIDTH
DIAMETER
SPEED
UCAT-S
(NONE)
Economy Label Unwinder. Fixed brake. For 3” cores.
Up to 6”
Up to 13”
Same as printer speed
UCAT-1
- 1-INCH
UCAT-1 for 25 mm (1”) diameter cores.
Up to 6”
Up to 8.6"
- CHUCK
UCAT-1 with 3” diameter “Quick-Chuck” ™ *
6.5”
Up to13”
-10-INCHES
UCAT-1 for labels up to 10” wide. 3” core.
Up to 10”
Up to 13”
-ACH
UCAT-1 with Adjustable Core Holder for core size 1” to 4”
Up to 6”
Up to 11”
UCAT-2
Standard
Heavy-duty Powered Unwinder for label rolls with 3” cores. Continuously adjustable feed rate. Control arm tracks label unwind usage and starts & stops automatically. Also rewinds.
Up to 6”
Up to 12”
-1-INCH
 UCAT-2 for 1" cores.
Up to 6”
Up to 8,6"
- ACH
UCAT-2 Powered Unwinder with Adjustable Core Holder for any core size from 1” to 4” in diameter.
Up to 6”
Up to 12”
- CHUCK
UCAT-2 with 3” diameter “Quick-Chuck” ™ *
Up to 6.5”
- 10-INCHES
UCAT-2 for labels up to 10” wide. 3” core.
Up to 10"

UCAT-40

The Ultimate Unwinder
(NONE)
Heavy-duty 16” Powered Unwinder with 3” diameter “Quick-Chuck”™. Continuously adjustable feed rate. Control arm tracks label usage and starts & stops automatically. Also rewinds. *
Up to 6.5”
Up to 16”

* Standard, CHUCK and 10-Inches Models are also available with a 1.5", 40-mm, 70-mm and 4" diameter “Quick-Chuck”™ at the same price (except the 4"). Specify when ordering.


HEAVY-DUTY LABEL SLITTERS & SLITTING STATIONS

MODEL

DESCRIPTION
INCLUDES ALL YOU NEED EXCEPT LABELS & CORES

LABEL WIDTH

SPEED
S-100

Heavy-Duty Label Slitter. Requires a CAT-2-CHUCK or TWIN-CAT-2.
6"
Same as Printer
S-200
Wide Heavy-Duty Label Slitter. Requires a CAT-2-CHUCK 10" Rewinder.
10"
Same as Printer
BH-1

Additional Blade Holder Assembly.
Includes Precision High-Speed Blade
-
-
HSB-10
10 Precision High-Speed Blades for Slitters
-
-
PC-1

Preset counter counts label batch size. Stops Rewinder automatically when job is finished. (factory installed)
Any
Same as Printer
Link
Adjustable Locking Bar to lock units together in position (Rewinder, Slitter & Unwinder).
-
-
SLIT-100
  • UCAT-S Economy Heavy-Duty Label Unwinder with fixed brake;
  • S-100 Heavy-Duty Label Slitter;
  • 2 Blade Holders with Blades;
  • CAT-2-CHUCK Heavy-Duty Rewinder; 76mm diameter ‘Quick-Chuck’ is Standard; specify if 38, 40, 44 or 70mm diameter is desired instead.
  • 1 Aluminium and 2 Thin Plastic Separator Plates;
  • ‘LINK’: Adjustable Locking Bar to lock units together in position,
  • Heavy-Duty Power Supply
6"
Up to 30" ips
SLIT-200
  • UCAT-1-10” Heavy-Duty Label Unwinder;
  • S-200 Heavy-Duty Label Slitter;
  • 3 Blade Holders with blades;
  • CAT-2-CHUCK-10” Heavy-Duty Rewinder;
  • 1 Aluminium and 3 Thin Plastic Separator Plates;
  • 'LINK’: Adjustable Locking Bar to lock units together in position;
  • Heavy-Duty Power Supply.
10"
Up to 30" ips
TWIN-SLIT-100
  • UCAT-S Economy Heavy-Duty Label Unwinder with fixed brake;
  • S-100 Heavy-Duty Label Slitter;
  • 2 Blade Holders with Blades;
  • TWIN-CAT-2 Heavy-Duty Rewinder; 3"m diameter ‘Quick-Chucks’ are Standard; specify if other diameter is desired instead.
  • ‘LINK’: Adjustable Locking Bar to lock units together in position,
  • Heavy-Duty Power Supply.
6"
Up to 30" ips
TWIN-SLIT-200
  • UCAT-1-10” Heavy-Duty Label Unwinder;
  • S-200 Heavy-Duty Label Slitter;
  • 3 Blade Holders with blades;
  • TWIN-CAT-2 Heavy-Duty Rewinder with 2 Quick-Chucks 10”;
  • ‘LINK’: Adjustable Locking Bar to lock units together in position;
  • Heavy-Duty Power Supply.
10"
Up to 30" ips


HEAVY-DUTY LABEL COUNTERS AND COMPLETE COUNTING STATIONS


MODEL

DESCRIPTION

WEB WIDTH

NOTES
C-100

PC-1  Preset Counter mounted on chassis with guides to position label web through sensor gap. Adjustable counter sensitivity. Counts single / multi-across labels or preset batch size. Can stop rewinder (CAT-2) automatically when job is finished.
6"
Requires a CAT-2 Rewinder to pull your labels through the Counter. Can also be used with a Label Unwinder to form a complete off-line label counting and manual inspection station. No slitting function is included.
C-200
Same as C-100 with wider width capacity
10"



HEAVY-DUTY QUICK-LOCKING CORE CHUCKS: "QUICK-CHUCKS"™


MODEL
DIAMETER
WIDTH
ROLL WEIGHT
C-38-170
38 mm (1.5”)
170 mm(6.5”)

Maximum
14 Kg (31-lbs.)
C-38-270
38 mm (1.5”)
270 mm (10.63”)

C-40-170
40 mm
170 mm(6.5”)
C-70-170
70 mm

C-76-170
76 mm (3”)

C-76-200
76 mm (3”)

200 mm (7.8”)

C-76-270
76 mm (3”)

270 mm (10.63”)
C-100-170
100 mm (4”)
170 mm (7.8”)
C-100-200
100 mm (4”)
200 mm (7.8”)
C-100-270
100 mm (4”)
270 mm (10.63”)

LABEL SEPARATOR PLATES

These Plates keep slit label rolls from interleaving or telescoping. Aluminum Separator Plates are recommended for the inner and outer Plates, Thin Plastic for the Plates in-between slit rolls. Typical order: 2 SP Aluminum Separator Plates + Plastic Plates equal to the number of cutting Blades being used. See Price List for available sizes.