LABELMATE Label Rewinder, Unwinder, Slitter and Core Chuck Products

Powered Label Dispensers

LD-100-RS, LD-200-RS & LD-100S Heavy-Duty Label Dispensers (...more)

Heavy-Duty Label Rewinders CAT-2 & CAT-2-TA

CAT-2 Heavy-Duty Label Rewinders (...more)

Low-Cost Label Rewinders

MC-10 & MC-11 Popular & Economical “MINI-CAT” Label Rewinders (...more)

Dual Spindle Unwind / Rewind Stations

Versatile Stand-alone Unwind / Rewind Stations with Label Inspection and Counting Options! (...more)

Heavy-Duty Label Unwinders

UCAT Heavy-Duty Label Unwinders (...more)

Label Slitters & Slitting Stations

S-100, S-200, S-100S, S-200S (...more)

Counters & Counting Systems

RRC-250, RRC-330, C-100 & C-200 (...more)

Reel-to-Reel Label Printer Mechanism

PM-300-LS, PM-300-HS Reel-to-Reel Label Printer Mechanism for Inkjet and Laser Heads (...more)

"QUICK-CHUCKS"^TM Core Chucks

Quick-Loading Core Chucks for Volume Label Production (...more)

Accessories

Accessories for LABELMATE PRODUCTS (...more)

Accessories for LABELMATE PRODUCTS

Click on any accessory name to see the picture.

Accessories for CAT and UCAT

APG-CAT: Optional Adjustable Paper Guide for CAT-2-ACH or CAT-2-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.

VANES: Set of three vanes (fins) required for standard and 10-inches shafts. Available in 38, 40, 44, 70 & 76mm.

ADAPT-326: Pair of adapters for use on any 76mm diameter CAT-2-CHUCK. Allows use of 152mm (6") diameter cores.

PS CAT-2: 230V - 50Hz AC Power Supply for CAT-2 and UCAT-2. Output: 11V - 2.5A. NB: Included with Rewinder.

LTO: Low Torque Option. For tension sensitive printers. Factory installed. (Inkjet). NO PICTURE AVAILABLE.

HD-PS: 230V - 50Hz DC Heavy-Duty Power Supply. Output: 14V - 4.6A. Recommended when using a Slitter.

Accessories for MINI-CAT

PS-MC: 230V - 50Hz Power Supply for MC-10 and MC-11. NB: Included with Rewinder.

Second Flange MC-10: Optional Outer Flange for MC-10 only.

AG-PMC: Optional Adjustable Paper Guide for the MC-10 or MC-11 Rewinder. Guides the outer edge of the label web to ensure an even roll edge.

Accessories for TWIN-CAT

INSP-1: Inspection Fixture mounts in minutes on the side of your TWIN-CAT-2. Includes two rollers that your labels glide over as they are presented for inspection. Bi-directional, variable speed operation allows control over winding tightness as well. Can be started and stopped with the optional Foot Switch listed below. (No picture available see INSP-1 + PC-1).

INSP-1 + PC-1: Optional Preset Counter with adjustable counter sensitivity. Conveniently pre-mounted on the INSP-1 Inspection Fixture ready to plug in and use.

Foot Switch: Foot Switch to start and stop the TWIN-CAT-2, CAT-2, or CAT-16 Rewinder.

Accessories for QUICK-CHUCKS

Outer Flange QC 76mm: 330mm (13") outer Flange for Quick-Chuck 76mm core diameter.

Inner Flange: 330mm (13") inner Flange for Quick-Chuck 38, 40, 44, 70 & 76mm core diameter.

Accessories for Slitters

Label Separator: Label Separator Plates keep slit label rolls from interleaving or telescoping. Use Aluminium Separator Plates for the outer Plates and thin Plastic in-between slit rolls. Typical order: 1 Aluminium Separator Plate + Plastic Plates equal to the number of cutting blades.

HSB-10: 10 Precision High-Speed Blades for Slitters.

BH-1: Additional Blade Holder Assembly Includes Precision High-Speed Blades.

Link: Adjustable Locking Bar to lock units together in position (Rewinder, Slitter & Unwinder). Available for S-100 & S-200.

PC-1: Preset Counter with adjustable counter sensitivity. Counts single- or multi-accross label and can preset batch size. Includes a Halt Control Cable to optionnally stop your CAT-2 Rewinder automatically when your job is finished. Factory installed only.

Accessories for Label Dispensers

LD-Flanges: Optional inner and outer Flanges for label dispensers. Fits all models. Sold in sets of two flanges.

C-1: Optional counter. Available for LD-100 and LD-200 models. Factory installed.